Bus-Profi Forum

Ich muss fragen: Wie kann ich die LinHK manuell starten? In der Telnet versucht die 7390 ständig LinHK zu starten. Irgendwas läuft da nicht rund...
Ich komme gar nicht dazu die Zeichenfolgen aus der Anleitung "Manueller Start von LinHK" einzutippen...

password:

BusyBox v1.20.2 (2013-05-13 12:53:07 CEST) built-in shell (ash)
Enter 'help' for a list of built-in commands.

ermittle die aktuelle TTY
tty is "/dev/pts/0"
Console Ausgaben auf dieses Terminal umgelenkt
# [20141006 23:21:21] LinHK starter: LinHK terminated with code 2
[20141006 23:21:21] LinHK starter: searching for LinHK installation...
[20141006 23:21:21] LinHK starter: starting LinHK in /var/media/ftp/USB-DISKPro-
01/linhk...
[20141006 23:21:26] LinHK starter: LinHK terminated with code 2
[20141006 23:21:26] LinHK starter: searching for LinHK installation...
[20141006 23:21:26] LinHK starter: starting LinHK in /var/media/ftp/USB-DISKPro-
01/linhk...
[20141006 23:21:32] LinHK starter: LinHK terminated with code 2
[20141006 23:21:32] LinHK starter: searching for LinHK installation...
[20141006 23:21:32] LinHK starter: starting LinHK in /var/media/ftp/USB-DISKPro-
01/linhk...
[20141006 23:21:37] LinHK starter: LinHK terminated with code 2
[20141006 23:21:37] LinHK starter: searching for LinHK installation...
[20141006 23:21:37] LinHK starter: starting LinHK in /var/media/ftp/USB-DISKPro-
01/linhk...
[20141006 23:21:42] LinHK starter: LinHK terminated with code 2
[20141006 23:21:42] LinHK starter: searching for LinHK installation...
[20141006 23:21:42] LinHK starter: starting LinHK in /var/media/ftp/USB-DISKPro-
01/linhk...
[20141006 23:21:48] LinHK starter: LinHK terminated with code 2
[20141006 23:21:48] LinHK starter: searching for LinHK installation...
[20141006 23:21:48] LinHK starter: starting LinHK in /var/media/ftp/USB-DISKPro-
01/linhk...
[20141006 23:21:53] LinHK starter: LinHK terminated with code 2
[20141006 23:21:53] LinHK starter: searching for LinHK installation...
[20141006 23:21:53] LinHK starter: starting LinHK in /var/media/ftp/USB-DISKPro-
01/linhk...
[20141006 23:21:59] LinHK starter: LinHK terminated with code 2
[20141006 23:21:59] LinHK starter: searching for LinHK installation...
[20141006 23:21:59] LinHK starter: starting LinHK in /var/media/ftp/USB-DISKPro-
01/linhk...
[20141006 23:22:04] LinHK starter: LinHK terminated with code 2
[20141006 23:22:04] LinHK starter: searching for LinHK installation...
[20141006 23:22:04] LinHK starter: starting LinHK in /var/media/ftp/USB-DISKPro-
01/linhk...

Schau' doch mal, ob die LinHK zumindest ein Logfile in der Form linhk-20141006.xxxxxx.log im Verzeichnis /var/media/ftp/USB-DISKPro-01/linhk oder darunter hinterlassen hat, das Aufschluss geben könnte.

Thomas