Willkommen auf unserer neuen Forenplattform für das Bus-Profi Forum
Neue Felder für die persönlichen Daten
Man kann jetzt seine öffentlich einsehbare Daten genau bestimmen. Details findet ihr in in diesem Beitrag.
Durch die neue Forensoftware und die Portierung der Daten konnten die Passwörter aus dem alten Forum nicht übernommen werden, bitte lassen Sie sich ein neues Passwort über die Passwort vergessen Funktion zusenden. Sollte es zu Problemen kommen kontaktieren Sie das Bus-Profi Team per E-Mail.
Neue Felder für die persönlichen Daten
Man kann jetzt seine öffentlich einsehbare Daten genau bestimmen. Details findet ihr in in diesem Beitrag.
Durch die neue Forensoftware und die Portierung der Daten konnten die Passwörter aus dem alten Forum nicht übernommen werden, bitte lassen Sie sich ein neues Passwort über die Passwort vergessen Funktion zusenden. Sollte es zu Problemen kommen kontaktieren Sie das Bus-Profi Team per E-Mail.
Die Suche ergab 291 Treffer
- Mo 13. Jan 2014, 12:03
- Forum: Domiq-Module - DOMIQ Sp. z o.o.
- Thema: Anwesenheit über Ping ?
- Antworten: 7
- Zugriffe: 2830
RE: Anwesenheit über Ping ?
Theoretically it could be possible, but using it to determine presence isn't very good solution - you would need to distinguish local and remote IP addresses...
- Mi 8. Jan 2014, 10:37
- Forum: Domiq-Module - DOMIQ Sp. z o.o.
- Thema: Variablen im Base
- Antworten: 3
- Zugriffe: 1317
RE: Variablen im Base
There is no way to store table inside a MEM/VAR variable. You can only save strings and numbers.
- Mi 8. Jan 2014, 10:14
- Forum: Domiq-Module - DOMIQ Sp. z o.o.
- Thema: Verbindung Remote mit mehreren iOS Geräten nach Löschung
- Antworten: 5
- Zugriffe: 1849
RE: Verbindung Remote mit mehreren iOS Geräten nach Löschung
Check in the Settings of your iPhone if you allowed Remote to send push notifications and make sure that you don't use any german characters in your iPhone's name.
- Mi 8. Jan 2014, 09:47
- Forum: Domiq-Module - DOMIQ Sp. z o.o.
- Thema: Discover output
- Antworten: 4
- Zugriffe: 1315
RE: Discover output
It means that some device with this IP is connecting and disconnecting to/from Base.
- Mo 16. Dez 2013, 14:19
- Forum: Domiq-Module - DOMIQ Sp. z o.o.
- Thema: Squeezebox über Cli steuern mit der Base
- Antworten: 9
- Zugriffe: 3073
RE: Squeezebox über Cli steuern mit der Base
The code should be as follows: function squezzbad(value) command('C.TCP.send.192.168.178.37:9090',value) end And if you want to invoke this function from an event or timer etc., use C.LOGIC in the Channel field and squezzbad(value) in the Value. Value can be any (as a string). For examle C.LOGIC=squ...
- Mo 9. Dez 2013, 14:30
- Forum: Domiq-Module - DOMIQ Sp. z o.o.
- Thema: Sende Taste an Base
- Antworten: 15
- Zugriffe: 5453
RE: Sende Taste an Base
Obviously you did something wrong. I tested it and I'm sure it works properly.
- Mo 9. Dez 2013, 14:13
- Forum: Domiq-Module - DOMIQ Sp. z o.o.
- Thema: Timer, Events und Schwellwerte
- Antworten: 37
- Zugriffe: 19271
RE: Timer, Events und Schwellwerte
Scenes registers changing works, I see that's unfortunatelly it's not described in the documentation :confused: (I don't know why). To save/load a scene with a register change use the following command: C.LCN.scenes.0.10=load:1;register:1. It means: load scene no. 1, all outputs, register 1. In orde...
- Mo 9. Dez 2013, 13:39
- Forum: Domiq-Module - DOMIQ Sp. z o.o.
- Thema: Sende Taste an Base
- Antworten: 15
- Zugriffe: 5453
RE: Sende Taste an Base
New syntax doesn't make any problem. If you test it from the LCN-Pro then the send-key command will be seen by Base as a command sent from LCN-Pro, not from LCN module. But try (just for testing) to bind send-key command to any phisical key and then press this key. Then you will see that the event a...
- Mo 9. Dez 2013, 11:20
- Forum: Domiq-Module - DOMIQ Sp. z o.o.
- Thema: Sende Taste an Base
- Antworten: 15
- Zugriffe: 5453
RE: Sende Taste an Base
@ Koboldo: Please tell me, how do you test sending keys to Base? Old syntax should work no matter what - I tested it a moment ago and I'm sure it works properly. If you use the new syntax: LCN.key.S.M.TP=action, for example: LCN.key.0.10.A1=hit then testing from LCN-Pro won't work unless you set (in...
- Do 5. Dez 2013, 11:23
- Forum: Domiq-Module - DOMIQ Sp. z o.o.
- Thema: Timer, Events und Schwellwerte
- Antworten: 37
- Zugriffe: 19271
RE: Timer, Events und Schwellwerte
To be honest, I don't clearly understand what you are trying to achieve:) You just want to lock output value between given hours or something more?